Things to Note During PE Drainage Pipe Installation
1. Before using and installing pipes: Carefully inspect the pipes for any damage incurred during loading, unloading, transportation, and stacking. If any defective pipes are found—such as cracks, breaks, or deformations—remove them promptly. 2. Connection between inspection wells and pipelines: It is recommended to use flexible joints sealed with flexible packing materials; the specific construction details should follow the design requirements. 3. When excavating trenches and preparing foundations, pay attention to the following: (1) The clear width at the bottom of the trench should be determined by adding 0.6 meters to the outer diameter of the pipe; (2) During trench excavation, adequate drainage measures must be implemented to prevent the trench bottom from being soaked by water.
1. Before using and installing the pipe material:
Carefully inspect the pipes during loading, unloading, transportation, and stacking for any damage. If any defective pipes—such as those with cracks, breaks, or deformations—are found, they should be promptly removed.
2. Inspection well and pipeline connection:
Flexible joints with flexible packing seals should be used; the specific construction details shall be in accordance with design requirements.
3. When excavating trenches and constructing foundations, pay attention to the following:
(1) The clear width at the bottom of the trench should be determined by adding 0.6 m to the outer diameter of the pipe material.
(2) During trench excavation, drainage measures should be implemented to prevent the bottom of the trench from being soaked by water.
More news
2022-06-30